WE OFFER YOU THE BEST PRODUCT

made to measure shims

Almost all the shims, especially the thin ones, are supplied in A4 format sheets or similar, so that they can be placed inside a normal filing cabinet or small format box, they are held together by a micro-junction that holds them connected on the sheet in such a way as to be from these they can be taken as needed without boxes being scattered throughout the work area.

The comb shims and calibrated shims are made in the following materials:

Burnished carbon steel only for standard sizes of commercial sheet metal.

Stainless Steel / Brass / Copper and all other metal materials normally present on the market
in standard shims of 0.1 / 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 /0.8 / 0.9 / 1.0 / 1.5 / 2.0 / 2.5 mm.

We can also supply the shims by obtaining them from calibrated tapes and strips with thicknesses from 0.003 up to 1.5 mm with tolerances that meet the international standard T3.
For all variations of thickness and material we are at your complete disposal to provide you with advice and prices.

The measures in this catalogue can be modified according to the needs of the customer or his company standard.

WRITE US FOR ANY INFORMATION
Describe your request and together we will find the best solution

YOU CAN ATTACH A .dxf or .dvg FILE