WE OFFER YOU THE BEST PRODUCT
Almost all the shims, especially the thin ones, are supplied on a single sheet of limited size, they remain attached to the sheet with a micro junction and are very easy to detach. This happens for ease of the protection treatment which in our case is the black electrolytic zinc plating, which guarantees more durable surface protection over time.
The comb shims for standard applications are supplied in carbon steel and with the tolerance of the sheets on the market, they are normally performed in thicknesses of 0.5 / 1.0 / 2.0 / 2.5mm.
The same can be supplied in different materials such as STAINLESS STEEL / COPPER / BRASS etc. With thicknesses from 0.1 / 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0mm and some types of soft materials up to 1.2 mm.
These materials come from certified sheet metal rolls and respect the European T3 Tolerance on minimum thickness.
For all dimensional and thickness variants, we are at your complete disposal to analyze the problem and provide an optimal solution.
SPP 1616 Shims from 0.1 to 1.0 mm
With hole ø 7
SPP 1616 Shims from 0.1 to 1.0 mm
With hole ø 9
SPP 2020 Shims from da 0.1 to 1.0 mm
With hole ø 7
SPP 2020 Shims from da 0.1 to 1.0 mm
With hole ø 9
SPP 3420 Shims from 0.1 to 2.0 mm
With hole ø 7
SPP 4016 Shims from 0.1 to 2.0 mm
With hole ø 7
SPP 4020 Shims from 0.1 to 2.0 mm
With hole ø 7
SPP 4516 Shims from 0.1 to 2.0 mm
With hole ø 9
SPP 4020 Shims from 0.1 to 2.0 mm
With hole ø 9
SPP 5020 Shims from 0.1 to 2.5 mm
With hole ø 9
SPP 5025 Shims from 0.1 to 2.5 mm
With hole ø 9
SPP 5050 Shims from 0.1 to 2.5 mm
With hole ø 9
SPP 6020 Shims from 0.1 to 2.5 mm
With hole ø 9
SPP 6520 Shims from 0.1 to 2.5 mm
With hole ø 9
SPP 6525 Shims from 0.1 to 2.5 mm
With hole ø 9